User`s manual

INSTALLATION : INSTALLATION PROCEDURES
2
02.9663.0001 G 05-Oct-2007 25
Hanging the Ballast (Arc Models Only)
The external ballast unit included with arc models will need to be installed near the luminaire. In order
for the lamp cable to be connected, the ballast must be placed within 40 inches (1m). The top panel
provides one mounting hole for attaching a truss hook or other mounting hardware as required.
(Compatible truss hooks are available from different manufacturers for your particular needs.).
To install truss hooks (if required):
Step 1. Attach truss hook as shown below (Figure 2-11).
Step 2. Tighten hardware securely.
Figure 2-11: Example Ballast Truss Hook Installation
Truss Hook
(not provided)
WARNING:
Attach truss
hooks securely.
Bolt and Washer
1/2" x 13 x 1"
(Provided)