User`s manual

MENU SYSTEM : MENU FUNCTIONS
4
02.9663.0001 25-Feb-02 55
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column
by its display abbreviation. The second column follows with a definition of the
abbreviation and then a third column provides an explanation of its purpose and
function.
Table 4-3: Menu Function Definitions
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address DMX Address Accesses function for setting luminaire DMX starting address.
ALL All Motors Tests all internal motors.
Amber Amber Specifies Amber for manual control (Manual) or test Amber functions
(Test).
Arc Arc Specifies luminaire as having an arc lamp source.
Blue Blue Specifies Blue for manual control (Manual) or tests Blue functions
(Test).
Cal ON Calibration On Configures arc luminaire so that lamp will strike after calibration procedure is
complete.
Chan XXX DMX Channel Specifies DMX channel for display of current data value.
Clear Clear Clears stored parameters and re-calibrates luminaire.
ColorMix Color Mixer Tests color mixing mechanism.
Config System
Configuration
Accesses functions for setting lamp, pan/tilt, and Menu Display options.
Also accesses lamp information such as number of strikes, and hours
used, along with their respective reset function.
Data DMX Data Accesses function for displaying DMX data by channel number.
Diffusn Diffusion Specifies manual control of Diffusion (Manual) or tests Diffusion func-
tions (Test).
Dimmer Dimmer Specifies dimmer mechanism for manual control (Manual) or tests dim-
mer/strobe functions (Test).
Disable Disable Disables a function.
Display Display Illumina-
tion
Accesses options for Menu Display on and off times.
DMX DMX Sets starting address for DMX systems.
Edge Edge Function Specifies edge function for manual control (Manual) or for testing (Test).
Enable Enable Enables a function.
Encoder Encoders Accesses encoder choices for diagnostic testing.
FAIL Test Fail Indicates that sensor test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.