User`s manual

VARI❋LITE® - VL1000™ ERS LUMINAIRE USER’S MANUAL
20 25-Feb-02 02.9663.0001
Hanging the Ballast (Arc Units Only)
The external ballast unit included with VL1000A and VL1000AS arc models will
need to be installed near the luminaire. In order for the lamp cable to be connected,
the ballast must be placed within 40 inches (1m). The top panel provides one
mounting hole for attaching a truss hook or other mounting hardware as required.
(Compatible truss hooks are available from different manufacturers for your particular
needs.)
Note: A safety cable is recommended for all hanging installations and may be
required by local codes.
To install truss hooks (if required):
Step 1. Attach truss hook as shown below (Figure 2-6).
Step 2. Tighten hardware securely.
Figure 2-6: Example Ballast Truss Hook Installation
Hook Hardware
(not provided)
CAUTION:
Attach truss
hook securely.
Truss Hook
(not provided)