User`s manual

INSTALLATION : INSTALLATION PROCEDURES

02.9663.0001 25-Feb-02 17

Accessory Frame Holder

An accessory frame holder is provided for the addition of a top hat or gel frame with

silks, frosts or color correction if required. The frame holder is designed to fit a

standard 8-inch gel frame or top hat.

To remove and replace frame or top hat:

Step 1. Disconnect luminaire AC input cable from power source.

Step 2. At front lens, press upward on accessory frame latch and turn to open.

Step 3. Remove frame/top hat, if any (Figure 2-3).

Step 4. Install frame/top hat and close latch.

Figure 2-3: Installing a Frame or Top Hat

Gel, Silk, or

Accessory Frame

Head Assembly

Latch

Press Up

and Turn

Frost