User`s manual

INSTALLATION : POWER AND DATA CABLING REQUIREMENTS
2
02.9663.0001 25-Feb-02 11
Lamp Power
To power the VL1000 lamp, an external ballast or dimmer unit is required depending
on the model.
VL1000T and VL1000TS Incandescent Models
The incandescent versions of the VL1000 ERS luminaire will require an external
dimmer unit for lamp power. A lamp power input cable is provided for connecting to
these units. Install a connector meeting your requirements using the following wire
color code:
* International (Harmonized) Standard
VL1000A and VL1000AS Arc Models
An external ballast unit is included with the arc version of the VL1000 ERS luminaire.
The lamp power input cable is already connectorized for use with this unit.
Note: There is no provision for lengthening the cable. The ballast must be placed
within 40 inches (1m) of the luminaire. The Lamp Power Input Cable has conductors
for lamp power and ballast control. It is not compatible with VARI❋LITE Series 300
lamp runs.
Wire* Connection
Green/Yellow AC Ground
Blue AC Neutral
Brown AC Line
Lamp Power Input Cable
Ballast Unit
Lamp Cable
40" (1m)
VL1000 A/AS
Model Luminaire