User`s manual

VARI❋LITE® - VL2000™ SPOT LUMINAIRE USER’S MANUAL
72 17-Sep-02 02.9673.0001 C
WARNING: Backcap and adjustment knobs will be HOT during lamp operation.
Wear gloves and/or use tools to prevent burns.
Lamp
The Lamp option has been added to the test menu. This option sets the lamp intensity
to 100%, adjusts the iris and edge to produce a hard edge. See “Align Lamp for Flat
Field” on page 21 for instructions on lamp adjustment. Pan/Tilt are disabled while
using the Lamp option, and pan/tilt settings will be restored upon exit of the Lamp
feature.
Note: When setting the Lamp option on luminaires linked by a loopback connector,
pan and tilt will be disabled for all the luminaires that are linked.
To run tests:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until TEST appears. Press [Enter].
Step 3. Use [Up] / [Down] arrows to select a parameter to test. Refer to “Menu
System Functions” on page 58 for a complete list of test parameters which
can be chosen.
Step 4. Press [Enter] to run test.
Step 5. Press [Menu] to stop test at any time.