User`s manual

MENU SYSTEM : MAPPING
4
02.9673.0001 C 17-Sep-02 65
RHrs Reset Lamp Info Resets lamp hour and lamp strike counters. For use when
new lamp is installed.
RTST Run-Test Indicates that a system mechanism test is in progress.
Sens Sensors Accesses sensor choices for diagnostic testing.
SEQ Sequence
Playback
Sets sequence playback mode to Individual (plays cues
from each luminaire) or Master (all luminaires play same
cue).
STAT Status/Error
Display
Allows scrolling through error list or displays OK if no errors.
Stor Store Cue Stores cue by number. Cue number stored is dependent on
next cue ID in cue list since this field is not editable.
Str Strobe Specifies strobe function for manual control.
Strk Strike Displays total number of lamp strikes.
STST Sensor Test Indicates that a system sensor test is in progress.
SWAP Swap Swaps pan and tilt functions for special focus requirements
such as moving mirror mechanisms.
Test System Tests Accesses diagnostic tests for internal mechanisms.
Tilt Tilt Specifies tilt function for manual control (Man) or tilt encoder
for testing (Test).
Time Timing Data Allows manual setting of timing values for dimmer/intensity,
focus, color, and beam.
Ver Version Displays current software version (in two pages).
VIRT Virtuoso console Sets starting address for luminaire in Virtuoso systems.
Whl1 Wheel 1 (Color) Specifies wheel 1 for manual control or testing.
Whl2 Wheel 2 (Fixed
Gobo)
Specifies wheel 2 for manual control or testing.
Zoom Zoom Specifies zoom function for manual control or testing.
Display Definition Purpose