User`s manual

VARI❋LITE® - VL2000™ SPOT LUMINAIRE USER’S MANUAL
64 17-Sep-02 02.9673.0001 C
ITim Intensity Time Accepts timing value for intensity fade time.
L ON Lamp is On Configures arc luminaire so that lamp will strike upon power
up.
LAMP Lamp Accesses lamp power up options and information (CFG) or
sets beam for lamp alignment adjustment (TEST).
LHrs Lamp Hours Displays total number of lamp operating hours.
LId Luminaire ID Displays unique ID number for the luminaire which is used
by Virtuoso consoles to identify the unit (in two pages).
LOFF Lamp is Off Configures arc luminaire so that lamp will await manual
command before striking.
Man Manual
Commands
Accesses functions for controlling luminaire mechanisms
and timing by entry of an absolute data value.
Mod Modify Cue Accepts cue number of cue to modify from cue list.
MODE DMX Mode Accesses functions for setting DMX mode to standard or
enhanced 8-bit or 16-bit.
Modl Model Displays model number of luminaire. For example, 2413
(VL2413).
Move Move
Enables and disables pan and tilt movement and auto-correction.
MSEQ Master
Sequence
A sequence playback mode which will replay the cues from
the master luminaire.
NoPg No Program Indicates that there is no software present in the luminaire.
OFF Off Turns off a function.
OK Okay Indicates that luminaire is ready to accept commands.
OK? Okay? Prompt for pressing [Enter] before an action is executed.
ON On Indefinitely Sets Menu Display to stay on until programmed otherwise
(DisP), turns on a function, or turns on a menu item.
P UP Lamp Power Up Accesses options for lamp power up: on, off, or after
calibration.
P/T Pan/Tilt Accesses pan and tilt options for DMX function, system
configuration, and testing.
Pan Pan Specifies pan function for manual control (Man) or pan
encoder for testing (Test).
PASS Test Pass Indicates that sensor test has passed.
PCue Play Cue Accesses cue list for play back of cues by number.
POWR Lamp Power Accesses function to turn lamp on or off.
PSEQ Play Sequence Plays back cue sequence. Press [Enter] to start and [Menu]
to stop.
RDef Reset Default Resets default system configuration values.
RGob Rotating Gobo Tests rotating gobo wheel.
Display Definition Purpose