User`s manual

MENU SYSTEM : OPERATION
4
02.9673.0001 C 17-Sep-02 55
Display Test
The Display Test will display every character on the menu display to check for
missing characters.
The following procedure is used to test the display.
Step 1. Press [Menu].
Step 2. Press [Up]/[Down] until Test appears. Press [Enter].
Step 3. Press [Up]/[Down] until DISP appears. Press [Enter]. All segments in the
alpha-numeric display should be lit.
Shortcuts
A few button combinations are provided as shortcuts for frequently used menu
functions. These shortcuts are as follows:
• Pressing [Enter] and [Up] at the same time = Lamp On
• Pressing [Enter] and [Down] at the same time = Lamp Off
• Pressing [Menu] and [Up] at the same time = Recalibrate
• Pressing [Menu] at Power up interrupts calibration. See “Program Starting
Address Without Calibrating the Luminaire” on page 23 for more information.
Keep in mind that [Up] and [Down] arrows are dependent on the Display Orientation.
Refer to “Display Orientation” on page 53.