User`s manual

VARI❋LITE® - VL2000™ SPOT LUMINAIRE USER’S MANUAL

10 17-Sep-02 02.9673.0001 C

Power and Data Cabling Requirements

Power

The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz.

Three amps to twelve amps will be required depending on the AC supply voltage and

product model.

Depending on the application, the luminaire’s AC input cable may require a different

connector. If required, install a new connector meeting your requirements using the

following wire color code reference:

* International (Harmonized) Standard

WARNING: DO NOT connect to three-phase service in countries with 240 volt

power.

For single-phase power at 100 to 240 volts RMS:

For three-phase power at 208 volts RMS:

Wire* Connection

Green/Yellow AC Ground

Blue AC Neutral

Brown AC Line

Connection Pin

AC Neutral X

AC Line Y

Ground (Earth) G

Connection Pin

Phase 1 X

Phase 2 Y

Ground (Earth) G