User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
72 23-Sep-02 02.9651.0001 C
Parameter Columns Window
The Parameter Columns window is used to define which types of information will be
displayed in the data window (columns). Using the cursor, select or deselect the boxes
as required.
For Focus and Color, two display options are available. Focus can be displayed as a
single column and/or two columns, pan and tilt. Color can likewise be displayed as a
single column and/or up to four individual color columns, which would provide data
for each filter/wheel/plate mechanism in the luminaire. When the single Focus/Color
box is checked, the column will display the Preset/Color source, as long as the data is
being taken from a single Preset/Color. If not from a single Preset/Color, then the
column would display “---”. If Pan/Tilt, etc. are checked then those columns also
display the source, or if set by encoders, the numerical values. To see both source and
# values, select [P] and [V] (at Luminaire Status window).
The Quick-Set buttons will automatically check the boxes which are applicable to a
certain type of luminaire and deselect the others, so that no excess columns will be
displayed in the window.
Checked boxes will be
displayed in window
Use Quick- Set buttons to configure
window for a certain type of luminaire
Click OK to return to
data window
Displays Preset source
Displays data for components of
in single column
focus/color group columns