User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
70 23-Sep-02 02.9651.0001 C
Examples:
• <Chan> [n] [Color] [m] [Enter] - applies color m to the selected channel n (where
m is the discrete color number).
• <Chan> [n] [Thru] [q] [Color] [m] [Enter] - applies color m to the selected range
of channels (where m is the discrete color number).
Note: Colors from the VARI❋LITE Color System can also be applied using the
keypad’s [VL Color] button. Refer to “Applying VARI❋LITE Colors” on page 105
for instructions.
Beams
The keypad can be used to assign beams to selected luminaires. The beam entered on
the keypad corresponds to the beam state saved in that particular beam select (refer to
“Beams” on page 83).
Examples:
• <Chan> [n] [Beam] [m] [Enter] - applies beam state m to the selected channel n
(where m is the discrete beam number).
• <Chan> [n] [Thru] [q] [Beam] [m] [Enter] - applies beam state m to the selected
range of channels (where m is the discrete beam number).
Note: If a profile does not provide default color and beam data, then there will be no
change for selected channels until custom color and beam selects are stored.