User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
66 23-Sep-02 02.9651.0001 C
Encoder Fan
The Encoder Fan function has been added to provide
five different types of encoder fanning. Encoder Fan
allows fanning of any encoder-controlled parameter
on a group of luminaires. The fan types available are
left fan, right fan, center fan, ends fan, and tilt fan.
Each type of fanning uses a different anchor point for
the base of the fan. Fan ordering is determined by
channel numbers and not by selection order.
Encoder fan settings can be changed from three
different locations. The Special menu, the Encoders
window, or from the Encoders panel on the console.
• Select Encoder Fan from the Special menu. Select fanning type.
• On the Encoders panel, the second Function select button displays "f". Press and
hold the "f" button, press the top Function Select button to scroll through the fan
modes. The fan mode selected here is momentary. Press and hold "f" button while
adjusting parameter encoder. Double-clicking "f" button will latch fan mode on.
The LED will flash when enabled.
• Select Encoder from the Panels menu. Click Fan for drop-down menu of encoder
fan choices.
"f" button
Fan Mode
Encoders Panel Encoders Window