User`s manual

MANUAL CONTROL : ENCODER CONTROL

02.9651.0001 C 23-Sep-02 63

Frame (VL7B™ Luminaire Only)

Framing (beam shaping) can be controlled by the soft encoders when [Frame] is

selected. These knobs can be used to access the framing parameters of the luminaire’s

beam.

Note: Buttons A and B can be selected individually or together. (When selected, the

letter will illuminate in the display.)

The soft encoders will be mapped as follows:

Encoder 1 - SHUTTER 1

Button [a] selects Encoder 1 for control of first motor.

Button [b] selects Encoder 1 for control of second motor.

Encoder 2 - SHUTTER 2

Button [a] selects Encoder 2 for control of first motor.

Button [b] selects Encoder 2 for control of second motor.

Encoder 3 - SHUTTER 3

Button [a] selects Encoder 3 for control of first motor.

Button [b] selects Encoder 3 for control of second motor.

Encoder 4 - SHUTTER 4

Button [a] selects Encoder 4 for control of first motor.

Button [b] selects Encoder 4 for control of second motor.

Encoder 5 - ALL

[flip H] - flips framed image to a horizontal position.

[flip V] - flips framed image to a vertical position.

Encoder 6 - ROTATE

[mid] - sends framing mechanism back to its mid-point.

[rot 90] - rotates framing mechanism 90 degrees from its current position.