User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
56 23-Sep-02 02.9651.0001 C
Channel Select Quick Buttons
Six special buttons are available for simplifying channel selection.
• [Invert] - deselects currently selected channels and selects all other patched
channels.
• [Clear] - clears all channel selections.
• [All] - selects all patched channels.
• [Active] - selects all channels with active* luminaires.
• [Mark] - selects all marked* channels.
• [Zero] - selects all channels in a zero* state.
* For a more in-depth explanation, refer to “Intensity States” on page 117.
[Next] and [Last]
The [Next] and [Last] buttons will step through all on-line channels.
[Next] - increments the channel selection by one.
If a single channel were selected (either with the keypad or the 100 button array),
pressing [Next] will increment the channel selection by one. If a range of channels is
selected, the first press of [Next] will select the first channel in that range. Subsequent
presses will increment the channel selection by one, but will not select a channel
outside the range.
[Last] - decrements channel selection by one.
If a single channel were selected (either with the keypad or the 100 button array),
pressing [Last] will decrement the channel selection by one. If a range of channels is
selected, the first press of [Last] will select the last channel in that range. Subsequent
presses will decrement the channel selection by one, but will not select a channel
outside the range.
[Next] / [Last] - pressing these buttons together will reselect the original channel
range.
Shortcut