User`s manual

POWER-UP AND PATCH : PATCH

02.9651.0001B 16-Apr-02 41

Note: The following three steps are only required if you intend to use the console’s

3D graphic features. For more information regarding these coordinates, refer to

“Defining X, Y, Z Locations” on page 274.

d. Use default 3D X, Y, and Z coordinates or enter new ones.

e. Use Position pop-up menu to specify luminaire orientation and location

(i.e. hanging, floor mount, stage left, etc.).

f. Use pointer or Rotate arrows to rotate luminaire to required position.

After the first luminaire’s icon has been placed and its information defined in the

Luminaire Patch window, you can place multiple icons without having the luminaire

patch window open each time. To do this, hold down while dropping icons.

g. When finished, click Save.

Step 4. Repeat Steps 1-3 for each VARI❋LITE luminaire in your system.

Step 5. When all luminaires are defined in your patch, at Patch menu, select

Disable Editing. (This prompts a dialog allowing you to save editing.)

Tip

Option

Select Profile

Specify lamp control

source and preheat level

Position luminaire

Define 3D settings

or use defaults

Define patch data

(VL5Arc, etc.)