User`s manual

POWER-UP AND PATCH : PATCH
3
02.9651.0001B 16-Apr-02 39
To add a scroller:
Step 1. To add a scroller, click Add Scroller box beneath device popup menu.
Step 2. At Scroller popup menu, select a scroller type in order to define which gel
string it will reference (see below).
Step 3. In DMX Address column, select a DMX bus. Using range entry fields
beneath column; add, change or remove addresses. These addresses will
define which DMX channels control scroller intensity.
Step 4. In Scroller column, select a DMX bus. Using range entry fields beneath
column, add, change or remove addresses. These addresses will define which
channels control scroller color.
Scroller Types
Five scroller type choices are provided in order to allow different scrollers to reference
different gel strings.
• ChromaQ - Type of scroller which supports 3D colors for the standard gel string.
Supports 16 frames.
• Scrollers 1-4 - Four additional generic scroller types.
Note: Scroller color control is controlled by the Wheel encoder.
Conventional Patch Window
Click “Add Scroller” to
highlight Scroller window
Define channels for intensity control
Bus Choice (if applicable)
Define channels for color control
Select scroller type to define its gel string