User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
34 16-Apr-02 02.9651.0001B
Step 3. If required, define plan view drawing size:
a. At 2D Display menu, select Drawing Size...
Drawing Size window will open.
b. Enter size, scale, and point of origin (X/Y
coordinate) for drawing (refer to “Match 3D”
on page 273 for instructions on using this
feature). (The default unit of measure is
English. To configure console for Metric
units, refer to “Settings Window” on
page 258.)
c. Click Ok.
Step 4. If required, define grid size (spacing between
grids):
a. At 2D Display menu, select Grid Size...
Grid Spacing window will open.
b. Enter grid spacing and select inches or
feet at pop-up menu. (The default unit
of measure is English. To configure
console for Metric units, refer to
“Settings Window” on page 258.)
c. Click Ok.
d. At 2D Display menu, enable or disable Snap To Grid
option (enabled when checked).
Step 5. Display luminaire icons in a two-dimensional or three-
dimensional location mode by clicking on either 2D or 3D. Refer to “2D/3D
Mode Guidelines” on page 47 for important information regarding this
feature.
Plan View Background Picture
A 2D background picture can be imported for use in the Plan View window. The
console will accept the following 1:1 format files:
• *.dxf
• *.dwg
To import Plan View background picture:
•At File menu, select Import 2D Background...