User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL

22 23-Sep-02 02.9651.0001 C

Step 1. Connect power/data cable from primary monitor to first (top) monitor port at

Macintosh computer. (Connect secondary monitors to additional video ports

as required. Additional video cards will not be installed unless requested.)

Step 2. Connect FireWire® from console CPU port to either comm port (1 or 2) at

Macintosh computer.

Step 3. Connect USB cable from console USB port to either USB port (1 or 2) at

Macintosh computer.

Step 4. If used, connect system comm cable (Ethernet or Fiber) to appropriate

console SYSTEM COMM port.

Step 5. Connect DMX cables to DMX output connectors as required.

Step 6. Connect power cable to console. (Console requires:

2.0 A at 120 V 50/60 Hz

or 1.0 A at 240 V 50/60 Hz

). Lock power cable in place by tightening

retaining bracket as shown.

Step 7. Connect power cable to computer. Ensure that voltage selector switch on

back of computer is set correctly.

Step 8. If applicable, connect Channel Select FireWire and power cables to console.

Keyboard Lock/Unlock

The pull-out drawer for the Macintosh alpha-numeric keyboard can be locked in place

for transport. To unlock drawer, turn knob clockwise. (Once drawer has been pushed

in, turn knob counter-clockwise to lock.)

Retaining Bracket

Tighten screw to

lock in place

To Unlock