User`s manual

INSTALLATION : VIRTUOSO CONSOLE

02.9651.0001 C 23-Sep-02 17

Step 7. At console, loosen monitors by flipping

locking bar and reposition monitors at about a

45 degree angle, retightening locking bars.

Step 8. Slide support bar to front of case.

Step 9. If included, remove auxiliary submasters

panel and set aside.

Step 10. Using at least two people, remove console

from case and place securely on table

(removing console will require one person to

stand in case in order to lift properly).

Step 11. Remove dust cover.

Note: Recover console when powered down and not in use.

Step 12. Remove cables from wedge compartment and place wedge back inside case.

Step 13. Re-attach case lid and set case aside.

Step 14. Re-adjust console monitors as desired.

Monitor

Locking Bar

Dust Cover

Bar slides forward