User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
16 23-Sep-02 02.9651.0001 C
Virtuoso Console
Overview
The following section provides instructions for connecting power, data and additional
components to the Virtuoso console. These instructions pertain only to the console
itself and do not provide details regarding the entire system hook-up. For more
detailed information on Virtuoso systems, refer to the Virtuoso System Installation
and Checkout Manual (02.3004.0400).
Unpacking Console Road Case
CAUTION: The Virtuoso console and case weighs approximately 400 lbs (182 kg)
and requires a minimum of two people for unpacking.
Unpack console case:
Step 1. Place console case on its side (as shown).
Step 2. Unlatch all latches.
Step 3. Remove case lid and set aside.
Step 4. Pull table partway out of case, raise legs, and
lock into place.
Step 5. Remove table and set upright on flat surface. Ensure that legs are properly
locked and will support weight of console.
Step 6. Remove wedge and set aside.
Wedge
Support Bar
Tilt monitors 45 degrees
before sliding bar forward.
Tab le
Cable storage
Auxiliary
Submasters Panel
Console
(not required)