User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL REFERENCE FOLD-OUTS
02.9651.0001 C 23-Sep-02
375
Virtuoso DX Timing/Filter Display
Quick Reference
Common operations and guidelines for using Timing and Filter
functions.
TIMING
Set an entire timing scheme:
Step 1. At touch screen, select a parameter(s) with hard or soft
buttons.
Step 2. At keypad, press [Time], [Delay], or [Speed] as required,
followed by time value. Time value will appear in cells of
selected parameters at touch screen.
Step 3. Repeat steps 1 and 2, selecting different parameters and
entering new values.
Step 4. Select channels as required.
Step 5. Press Timing button to send all values in screen.
Send a timing value directly to a selected parameter:
Step 1. Select channels as required.
Step 2. At touch screen, select a parameter with hard or soft buttons.
Step 3. At keypad, press [Time], [Delay], or [Speed] as required,
followed by time value and then [Enter]. Time value will
appear in cell of selected parameter at touch screen and be
sent directly to selected channels.
FILTERS
Using filters while storing cues:
Step 1. Set filters as required. (When filters are selected (high-
lighted), the associated parameters will be the only parame-
ters stored during any subsequent cue store operations. When
filters are deselected (not highlighted), the associated param-
eters will not be stored during any subsequent cue store oper-
ations.)
Step 2. Press filter . The filter state will be applied to all
cues stored from this point on, until changed.
Step 3. Store cue as usual.
Clear All
FILTER
DYNAM
SNEAK
IFE
CBG
Wheel
Magen
Amber
Blue
Down
Up
Tilt
Pan
Prism
Frost
Edge
Framing
Strobe
Zoom
Beam
Index
R Gobo
Gobo
INTEN FOCUS COLOR BEAM EDGE GOBO ENTER
Effect
E Index
Speed1
Speed2
Speed3
TIMING
Mode Button -
Push to display mode
attributes in touch screen.
Parameter Group Buttons -
Selects or deselects parameter
groups. (Pressing once selects
all, pressing again deselects all.)
Deselects all
parameters on screen.
Selects all
parameters on screen.
Touch Screen -
Allows selection of
individual parameters
or dynamic states.
Parameter Grid -
Indicates which parameters
are selected.
Time Format
Time is entered at the keypad in
minutes and seconds, seconds, or seconds and
tenths of seconds. (Max time 59:59)
Examples :
[2] [5] = 25.0 (25 sec)
[2] [.] [.] [5] = 2:05 (2 min, 5 sec)
[1] [ . ] [3] = 1.3 (1.3 sec)
[.] [5] = .5 (1/2 sec)
Speed Format
Speed is entered at the keypad in
degrees per second.
Luminaire
VL2
VL4
VL5
VL6/VLM
VL7
Rate
120
240
220
280
150
Max Speed
200
400
400
400
400
Accesses templates
when pressed
Select tab to change window mode
Templates
Timing entry
Displays template name
Template operations
Filter grid
Parameter selected
when lit
Selects entire
column of parameters
Window
Enter
To Cue