User`s manual

TUTORIAL : BASIC TUTORIAL
A
02.9651.0001 C 23-Sep-02 335
2. Create a sequence as follows:
a. At Data menu, select Sequences. (Sequences window will open.)
b. Using cursor, select Sequence 1 at upper half of window.
c. At lower half of window, at Step 1, Action 1, use popup menu to select
Preset (PSet).
d. At Action 1 value, enter "1". (This specifies that the luminaires will move
to Preset 1 in the first step of the sequence.)
e. At Step 2, Action 1, use popup menu to select Preset (PSet).
f. At Action 1 value, enter "2". (This specifies that the luminaires will move
to Preset 2 in the second step of the sequence.)
g. At Time section of window, enter 2.00 for both Step times, and 0.00 for
all other times.
3. Define effect as follows:
a. At Data menu, select Effects. (Effects window will open.)
b. Using cursor, select Effect 1.
c. At Set column, enter "1".
Click to select Sequence 1
Steps shown here
correspond to Seq
selected above
Select Preset Enter Preset number Enter time values