User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
334 23-Sep-02 02.9651.0001 C
Create and playback an effect:
Refer to Ch. 8 for more detailed instructions.
1. Create a set as follows:
a. At Panels menu, choose Select Displays. (Select Displays window will
open.)
b. At Group section of window, click inside Group 1 box. Channels 1-5
(your group of luminaires) will now be selected.
c. At Data menu, select Sets. (Sets window will open.)
d. Using cursor, select Set 1 at upper half of window.
e. At lower half of window, while holding [Shift], select Parts 1-3.
f. Click Int (Interlaced) button. Your group of five luminaires will be dis-
tributed across the three parts.
Click inside box 1
to select Group 1
Ensure Select mode
is active
Click to select Set 1
Select Parts 1-3
Interlaced distribution
Parts shown here
correspond to Set
selected above