User`s manual

TUTORIAL : BASIC TUTORIAL
A
02.9651.0001 C 23-Sep-02 333
a. Press [F1]. (Store window will open.)
b. Using cursor, select Preset. (Or press [P] at key-
board.)
c. Enter "3" for the preset number.
d. Click OK.
e. At Select Displays window, at Preset section, click
inside Preset 3 box to send luminaires to Preset 3.
6. Add timing information as follows:
a. At Timing Display window, click Timing tab to display Timing screen.
b. Click in Pan and Tilt boxes to select for timing information.
c. Press [F11]. (Timing window will open.)
d. Enter "5".
e. Click OK to send value to Timing screen. "T 5.00"
will appear in Pan and Tilt boxes.
f. At Timing screen, click Enter button to send
timing information to cue store operations.
7. Store Cue 3 as follows:
a. Press [F1].
b. Enter "3" as cue number, and click OK to store. Cue
3 is now stored with timing information and a
reference to Preset 3’s focus information.
8. Playback all three cues. Refer to instructions on
page 330.
Timing Information