User`s manual

TUTORIAL : BASIC TUTORIAL
A
02.9651.0001 C 23-Sep-02 327
Store two presets:
1. Store Preset 1 as follows:
a. At console Pan and Tilt encoders, turn until luminaire is in new position.
b. Press [F1]. (Store window will open.)
c. Using cursor, select Preset. (Or press [P] at keyboard.)
d. Enter "1" for the preset number.
e. Click OK. Current 3D graphic look is now stored as Preset 1 for future
recall.
2. Store Preset 2 as follows:
a. At Panels menu, choose Encoders to open
window. At encoder window, use Pan and Tilt
encoders to move luminaires to new position.
b. At Select Displays window, at Color section, click
inside Color 8 box. Beams will now change color in
3D Graphic window.
c. At console keypad, press [Store] [Preset] [2] [Enter]. New 3D graphic
look is now stored as Preset 2.
Color Section
Click inside box 8
to select color
Ensure Select mode
is active
store
Store Preset 2 *
FE
CG
I
B