User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
326 23-Sep-02 02.9651.0001 C
Select group and apply intensity and color:
1. To deselect group (for purposes of this tutorial), click somewhere inside 3D
Graphic window. (Luminaires will now be deselected, turning from orange
back to gray.)
2. At Panels menu, choose Select Displays. (Select Displays window will
open.)
3. At Group section of window, click inside Group 1 box. Luminaires will now
be highlighted again in 3D Graphic window.
4. At console (near Intensity encoder), press [Full] button to bring intensity to
full (100%). Beams will now appear in 3D Graphic window.
5. At Select Displays window, at Color section, click inside Color 4 box.
Beams will now have color in 3D Graphic window.
Group Section
Click inside box 1
to select Group 1
Ensure Select mode
is active
Color Section
Click inside box 4
to select color
Ensure Select mode
is active