User`s manual

SHOW CONTROL BY EXTERNAL DEVICES : MIDI/SMPTE TIMECODE
18
02.9651.0001 C 23-Sep-02 311
Timecode Scripts Window
The content of timecode scripts can be viewed and edited in the Timecode Scripts
window. The Delete, Replace, Punch In, and Insert features allow editing so that an
entire script does not have to be re-recorded in order to make a change. The Time
column may also be edited.
Guidelines for editing timecode:
To allow creation of multiple scripts, only the selected script will be run.
Any action may change the times of all cues...
• If a step is deleted, all the following cue times will change.
• If a step is added, all the following cue times will change.
• If the [Record] button is pressed while timecode is running, all the times will
change (all steps may be deleted).
• It is best to edit a time within the time range that it already contains.
• Timecode will only be visible if the [Play] or ]Record] buttons are pressed. If the
signal is expected from an external source then 'Wait' will be displayed.
• To insert a step, select a step click "insert" icon and press a single action to be
added. To save action, use [Update] [Macro] [Enter] sequence.
• The Punch In feature bases the new steps/events on the previous timecode and
does not record based on external timecode. Therefore, it may be necessary to edit
the times manually once the new section is added.
• The Timecode Scripts window calculates timecode displayed for steps based on
frame rate selected in the Timecode window. When the frame rate is changed in
the Timecode window, the Timecode Scripts window will recalculate values
according to the frame rate selected.
• Multiple playback scripts are possible. Scripts selected in Timecode Scripts
window are enabled for playback.
• In the Timecode Scripts window individual hour/minute/second/frame times on a
step can be edited without affecting any other step times in the script.