User`s manual

3D GRAPHIC DISPLAY : 3D DISPLAY WINDOW

02.9651.0001 C 23-Sep-02 277

While in Channel Select Mode, the following options are available:

• Click on individual luminaires to select for manual control.

• Hold down left trackpad button and drag cursor across a range of luminaires to

select for manual control.

While in Camera Angle Mode, the following options are available:

• Hold down left trackpad button while using trackpad to move camera angle up/

down or right/left. (Whichever direction you move first will lock the graphic into

either the up/down or right/left mode. Release button and press again to move

graphic in a different direction.)

• Hold down left trackpad button and button while using trackpad to zoom

in or out.

• Hold down left trackpad button and button while using trackpad to rotate

venue.

• Hold down left trackpad button and button to bring up camera focus

crosshairs. Clicking somewhere within the graphic with these crosshairs will

refocus the camera angle to that center point.

Note: One method of speeding up 3D graphic performance is to limit the number of

channels (and therefore their associated luminaires) which are displayed in the 3D

Graphic window at any one time. Refer to “Display Filters” on page 261.

The following "quick keys" can be used with the 3D Graphic window to adjust the

camera angle:

When the Center Lines Mode is selected, the lines (beam representations) will

change color according to intensity states. The following color code applies:

•Black - Out

• White - Full

• Red - Zero

• Green - Marked

4, 6 = left, right direction (also arrow keys)

8, 2 = up, down (also arrow keys)

7, 9 = zoom in, zoom out (also +, -)

Option

Shift