User`s manual

3D GRAPHIC DISPLAY : 3D DISPLAY WINDOW
16
02.9651.0001 C 23-Sep-02 275
Changing 3D Height Location
An easy method of changing the height (Z coordinate) of an object in the 3D
environment is accomplished at the Plan View window.
Height can be adjusted in two ways:
• By an absolute setting. For example, all luminaires are raised to an absolute height
of 10 feet.
• On a relative basis. For example, all luminaires are raised two feet from their
current height (regardless whether their height is the same or different).
To change height:
Step 1. At Operation menu, select Plan View. Plan View window will open and 2D
Display menu will become available on menu bar.
Step 2. At Patch menu, select Enable Editing.
Step 3. Select required luminaire icons using pointer.
Step 4. At 2D Display menu, select Change Height. Set Height
window will open.
Step 5. Do one of the following:
To change height(s) to an absolute setting, select Z. Enter
value which will become new height of all selected luminaires. Click OK.
To change height(s) on a relative basis, select
∆
Z. Enter value which will be
added or subtracted from current height location. Click OK.
Absolute height
adjustment
Relative height
adjustment
Enter value