User`s manual

SUBMASTERS : PLAYBACK
14
02.9651.0001 C 23-Sep-02 255
Playback
Advanced Playback of Cues
A cue loaded into a submaster becomes the pending cue. When [Go] is pressed, the
pending cue will play.
Play a cue:
Step 1. At keypad, press [Cue] [n] [Enter] or scroll through cue list to select cue. It
will be displayed in the keypad window.
Step 2. At required submaster, press [Select] to
select submaster for playback function.
Step 3. Press [Load] to place cue in pending file
(as shown in submaster display).
Step 4. Set Grand Master fader at required level.
Step 5. Set submaster fader at required level.
Step 6. Press [Go] to play cue.
Play next cue:
The submaster always sequences, placing the next
sequential cue from the cue sheet or any linked cue
in its pending file. Linked cues without wait times
will await manual execution.
• Press [Go] again to play next cue.
Play previous cue:
• Press [Back] to play previous cue (previously
active on that submaster). Subsequent presses
of [Back] will step backwards through cue
sheet.
Play a cue again:
• Press [Run] to play active cue again.
recall cue 52
Cue 52 ∗
FC
BD
52
Blwash
I
G
rate 100
53
Rdwash
F
I
F
G
E
CB
C T
52
Selects submaster
for playback
Loads cue
Plays active cue
Plays pending cue
Stops and steps
through cue
Plays last cue
Scales intensity
Active cue
Pending cue
Blwash
01
Select
Load
Run
Stop/
Step
Back
Go
Shows autofollow time, or
cue execution time if no
autofollow is specified.