User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
250 23-Sep-02 02.9651.0001 C
Release a manual assignment using [Choose] or [Clear]:
When releasing a submaster from a manual assignment using these methods, no
parameter data will be changed; the channel is just no longer associated with that
submaster.
• Press [Man Assign] / [Choose] / [Choose] at associated submaster, or
• Press [Clear] along with [Choose] button of associated submaster to clear
submaster of all modes.
Intensity Level with Manual Assign
When channels are assigned to a submaster using the Manual Assign function, the
current intensity value for the selected channels at the time of being assigned becomes
the full intensity range which can be adjusted by the submaster fader.
Example 1:
If a channel is assigned while its intensity value is at 100%, the submaster fader
will have control of all 100% of the luminaire’s potential intensity output. Subse-
quently reducing the submaster fader from 100% to 50% would result in a
luminaire intensity value of 50%.
Example 2:
If a channel is assigned while its intensity value is at 50%, the submaster fader
will have control of only half of the luminaire’s potential intensity output (scaled
appropriately to the fader’s full range). Subsequently reducing the submaster
fader from 100% to 50% would result in a luminaire intensity value of 25%.
Bump
When in Bump mode, pressing the submaster’s [Select] button will instantly "bump"
to the full intensity provided by the cue as modified by the fader position.
Bump intensity of active cue to 100%:
Step 1. Press [Bump] along with [Choose] button for required submaster. Submaster
is now in Bump mode and [Select] will begin flashing.
Step 2. Press [Select] to bump intensity.
Release submaster from Bump mode:
• Press [Bump] / [Choose] at submaster to clear.