User`s manual

SUBMASTERS : SUBMASTER MODES

02.9651.0001 C 23-Sep-02 247

Using Filters with Effects

Filters can be used with effects to withhold information from cues, beams, and presets

when they are part of an effect sequence. When cues are included in sequences, the

cue times are used instead of attack times, unless timing is disabled in the filter

selection.

Clear filters from submaster:

Step 1. At touch screen, clear all filter selections.

Step 2. Press [Func Filter] / [Choose] at submaster to clear.

Channel Filter

The Channel Filter feature is used to specify certain channels for playback on a

submaster. Those “filtered” channels then become the only channels used by the

submaster whenever it plays back a cue or effect.

Filter a channel(s):

Step 1. Select required channels.

Step 2. Press [Chan Filter] along with [Choose] button for required submaster.

Release a Channel Filter:

Step 1. Deselect all channels.

Step 2. Press [Chan Filter] / [Choose] at submaster to clear.

Dynamic Disable

The Dynamic Disable feature disables the playback of any macros and/or snapshots

linked to a cue. For example, if you wish to view data in a particular cue, you could

disable any linked event(s) so that it will not occur upon completion of the cue.

Apply Dynamic Disable to a submaster:

• Press [Dyn Dsbl] along with [Choose] button for required submaster.

Release a submaster from Dynamic Disable mode:

• Press [Dyn Dsbl] / [Choose] at submaster to clear.