User`s manual

ADVANCED EFFECTS FEATURES : ADVANCED PLAYBACK
13
02.9651.0001 C 23-Sep-02 239
Run/Stop Control
The Run and Stop modes are used to start, stop, and step through an effect when in
AutoLoad mode (see previous page). These will override any submaster actions when
an effect is assigned to a submaster. Pressing either button at the Effects panel will
operate the effect by stopping, stepping, or running.
Stop/Flag - Stops or steps through an effect. When in a stopped state, pressing [Stop/
Flag] will advance through the steps of an effect, one with each button press, in time.
When an effect is active in a submaster and [Stop/Flag] is selected, the effect will not
execute when the submaster [Go] button is pressed.
Run - Starts an effect. When an effect is active in a submaster and Run is selected, the
effect will execute when the submaster [Go] button is pressed.