User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL

236 23-Sep-02 02.9651.0001 C

Assigning Sequence Level Timing

From the Effects Panel (Virtuoso Console)

Assign Step, Attack, Sustain, and Decay times:

Step 1. At Effects panel, press [Effects].

Step 2. Press [Effect Select Button] of effect you wish to modify.

Step 3. Press [Seq].

Step 4. Press [Edit]

Step 5. Using timing buttons and encoder knob, set timing parameters.

Step 6. Press [Edit].

Step 7. Press [Store] / [Sequence Select Button] to store changes.

Note: Holding down the timing button and turning the encoder knob at the same time

will change the time for all steps in the sequence.

From Select Displays (Virtuoso DX Console)

Assign sequence level times:

Step 1. At Effects panel, press [Seq].

Step 2. At Effects select display, press [Sequence Select Button] of sequence you

wish to modify.

Step 3. At Step select display, press [Step Select Button] of step you wish to modify.

Step 4. Using encoders, set timing values. To scale timing values for all steps in

sequence, press [Shift] while adjusting encoder. To set all steps to same

value, turn encoder to 0.00 and then up to desired value.

From Sequences Window

Assign Step, Attack, Sustain, and Decay times:

Step 1. At Data menu, select Sequences. Sequences window

will open.

Step 2. Using cursor and keyboard, enter timing information as

required.