User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
230 23-Sep-02 02.9651.0001 C
Advanced Attributes
Changing Direction, Mode, or Start Settings
Direction, Mode, and Start attributes can be defined using the Effects controls and/or
associated effects windows. These attributes are always stored into an effect during a
store operation and unless changed by the user, the default settings will be stored
initially. (Refer to “Direction, Mode, and Start” on page 127 for descriptions of these
attributes.)
When an effect is selected, the corresponding attribute buttons will light. These can be
defined at the time of effects creation or changed at a later time.
Using Effects panel:
Step 1. At Effects Control, press [Effects].
Step 2. At Effects select display, press [Effect Select Button] of effect you wish to
modify.
Step 3. Press buttons for new Direction, Mode, and Start settings.
Step 4. Press [Store] / [Effect Select Button] to store changes.
Using Effects window:
Step 1. At Data menu, select Effects. Effects window will open.
Step 2. Use pop-up menus to define new Direction, Mode, and
Start settings for each effect.
Defines Set
Defines Sequence
Effects level timing attributes
Direction, Mode, Cycle, and Start attributes
(refer to next section)