User`s manual

ADVANCED CUE FEATURES : ADVANCED CUE STORING AND MODIFYING

02.9651.0001 C 23-Sep-02 219

Recall stored preset data:

Step 1. At touch screen display, select Filter mode. Using touch screen, select

parameters to be recalled.

Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in

the luminaire’s current time settings.

Step 3. Select channel(s) as required.

Step 4. Press [Recall] [Preset] [x] [Enter] or [Recall] [Preset Select Button]. All

stored data will be recalled from the specified preset (x), as defined by the

selections on the filters.

Undo a Delete Command

In addition to reversing Store and Update commands, the Undo feature can be used to

reverse a Delete command.

Undo (reverse) a Delete command:

• [Undo] [Enter] - reverses the last store/update/delete command.

Modifying Cues in a Submaster

Cues can also be modified and re-stored while active in a submaster. The Store,

Selective Store, and Update commands can be performed by using them in

combination with the submaster’s [Choose] button.

Guidelines:

• When modifying a cue in a submaster, the modified cue data is automatically

loaded into the associated submaster. (Because the loaded cue is subject to altering

by the fader setting, unexpected behavior can occur when that fader setting is less

than full. See “Unexpected Behavior” below.)

• Only channels receiving instructions from the cue being modified will be changed.

latest str/upd/del

Undo *