User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
218 23-Sep-02 02.9651.0001 C
Modify a preset using Selective Store:
Step 1. At touch screen display, modify filter settings as required.
Step 2. Select required channels.
Step 3. Press [Sel Store] / [Preset Select Button] or [Sel Store] [Preset] [n] [Enter]
(where n is the discrete Preset number).
Undo (reverse) a Selective Store command:
• [Undo] [Enter] - reverses the last store/update/delete command.
Selective Recall
The Selective Recall feature is used to recall specific parameter data from specified
channels (active or inactive) in a cue, preset, or beam state.
Guidelines:
• Selective Recall routes through the filter settings.
• If Timing is selected at the touch screen filter, then the parameter and all timing
information will be recalled (making that the current state).
• If Timing is not selected at the touch screen filter, then only the parameter will be
recalled.
• If Manual Timing is enabled (refer to “Manual Timing” on page 177), then the
current time information in the luminaires will be recalled. (For example, if focus
has a time of 10 seconds and color has a time of 5 seconds, then the luminaire will
recall the parameters using those individual times.)
Note: The system assumes that data to be recalled is from a cue. As such, use of the
<Cue> button is optional.
Recall stored cue data:
Step 1. At touch screen display, select Filter mode. Select parameters to be recalled.
Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in
the luminaire’s current time settings.
Step 3. Select channel(s) as required.
Step 4. Press [Recall] <Cue> [m] [Enter]. All stored data will be recalled from the
specified cue (m) for the selected luminaires, as dictated by the selections on
the filters.