User`s manual

ADVANCED CUE FEATURES : ADVANCED CUE STORING AND MODIFYING

02.9651.0001 C 23-Sep-02 217

Selective Store

The Selective Store feature is used to modify or add parameter data to a cue, preset, or

beam state for specified channels (active or inactive). For example, with this function

you could modify a cue’s color parameters, while leaving all other parameter data

intact for a particular cue or a range of cues.

Selective Store is most useful when you know the exact range of cues to be modified.

Note: Unlike Update, Selective Store commands are routed through the Channel

Select panel and the filter settings.

Selective Store new data for a particular parameter in a cue:

Step 1. Select required channels.

Step 2. At touch screen, modify a parameter(s) as required. For example, color.

Step 3. Press [Sel Store] <Cue> [n] [Enter]. The new color parameters will be stored

in place of the old color parameters, but all other parameter data will remain

the same.

Selective Store new data for a particular parameter in a range of cues:

Step 1. Select required channels.

Step 2. At touch screen, modify a parameter(s) as required. For example, color.

Step 3. Press [Sel Store] <Cue> [n] [Thru] [m] [Enter]. The new color parameters

will be stored in place of the old color parameters, but all other parameter

data will remain the same.

Note: As a caution when altering parameters for more than ten cues, a confirmation

window will open.

Selective Store all selected channels into a cue:

Step 1. Select required channels.

Step 2. Using manual control, set parameters as required.

Step 3. At touch screen, set filters as required.

Step 4. Press [Sel Store] <Cue> [n] [Enter]. All selected channels are re-stored into

the specified cue at current stage levels. Only those parameters allowed by

the filter settings are affected.

Tip