User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL

214 23-Sep-02 02.9651.0001 C

Cue Store Target

Pressing [Store] [Enter] always defaults the store command to the last selected cue.

(This cue is displayed in the command-line display.)

Additionally, when working with decimal cues, it is not necessary to re-enter the

leading cue number.

For example:

• [Store] <Cue> [5] [Enter] = store Cue 5

• [Store] <Cue> [5] [.] [3] [Enter] = store Cue 5.3

• [Store] <Cue> [.] [7] [Enter] = store Cue 5.7

Cue Attribute Target

For the currently selected cue (see illustration above), attribute instructions can be

applied without re-specifying the cue target. For example:

• To link another cue to the currently selected cue, press [Link] [n] [Enter] - where n

is the linked cue.

• To link a snapshot, macro, or effect to the currently selected cue, press [Link]

[Macro*] [n] [Enter] - where n is the number of the macro you wish to link.

* [Snap Shot] or [Effect] can be used instead of [Macro].

• To add a wait/trail time, out time, or loop to the currently selected cue, press [Wait]

[n] [Enter] - where n is desired time or number of loops.

* also [Trail], [Out Time], or [Loop].

Miscellaneous Shortcuts

• Holding down [Clear] will clear an entire unterminated command line.

• Pressing [Next] / [Last] together will reselect the original channel range or group.

Creating Cue Numbers without Storing Data

It is possible to create and label cues without storing data. To do this is, store a cue

while all luminaires are inactive or off-line.

set cue 52

Cue 52 ∗

Blwash

Selected Cue

[Store] [Enter] will always re-store this cue