User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
210 23-Sep-02 02.9651.0001 C
Remove a wait/trail time from a range of cues:
• [Cue] [n] [thru] [t] [Wait] [Enter] - removes the wait or trail time from the
specified cue range (n thru t).
To add a wait/trail time to the currently selected cue, press [Wait] [n] [Enter] - where n
is the desired time.
* or [Trail].
Out Time
Out Time instructions may be stored into a cue. An Out Time will provide a “fade to
no intensity level” instruction to any luminaires that are “going inactive” in a cue. Out
Time also provides the time value that luminaires are to fade to inactive in the event
the submaster is deselected.
The console has a setting for a default Out Time, which is stored into all new cues
where a different time is not specified. The default setting is 3 seconds, but can be
changed universally in the Settings window. Refer to “Settings Window” on page 258
to change the default Out Time.
Store a cue with an out time:
• [Store] <Cue> [n] [Out Time] [x] [Enter] - stores Cue n with an out time of x.
Add an out time to a range of cues:
• [Cue] [m] [Thru] [n] [Out Time] [x] [Enter] - adds an out time of x to the range of
cues m through n.
Reset a cue’s out time back to zero:
• [Cue] [n] [Out Time] [Enter].
To add an out time to the currently selected cue, press [Out Time] [n] [Enter] - where n
is the desired out time.
Shortcut
Shortcut