User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
208 23-Sep-02 02.9651.0001 C
Loop
Loop instructions are used in combination with link instructions to replay a sequence
multiple times.
When a cue with a link and loop instruction is played back, the linked cue will
automatically be played back on the same submaster and then the original cue would
be reloaded and the sequence would repeat as defined by the loop number. After the
defined number of loops, the submaster will automatically load the next sequential cue
into the submaster’s pending file, activating the next cue based on autofollow for loop
or sequential cue.
Loops should be defined on the last cue of a sequence.
Store a cue with link and loop instructions:
• [Store] <Cue> [n] [Link] [m] [Loop] [x] [Enter] - links Cue n and Cue m with a
loop of x times.
Add a loop to an existing linked cue:
• [Cue] [n] [Loop] [x] [Enter] - Cue n and its linked cue will loop x times.
Remove a loop instruction from a linked cue:
• [Cue] [n] [Loop] [Enter].
To add a Loop instruction to the currently selected cue, press [Loop] [n] [Enter] -
where n is the number of desired loops.
Tip
Shortcut