User`s manual

SNAPSHOTS, MACROS, AND BOARD CUES : BOARD CUES
11
02.9651.0001 C 23-Sep-02 203
Board Cues Window
The content of board cues can be viewed in the Board Cues window. This window
displays all recorded board cues in numerical sequence and provides data regarding
linked events which would run during playback. Link attributes such as loops and
autofollow types (wait and trail) are visible as well as the associated times (refer to
“Special Cue Attributes” on page 206). Unless links are provided, which will run cues
out of sequence, any playback sequences will observe the numerical order found in the
sheet.
The Delete, Replace, Punch In, and Insert features allow editing so that an entire board
cue does not have to be re-recorded in order to make a change. The Time column may
also be edited.
Access Board Cue Sheet:
Step 1. At Operation menu, select Board Cue Sheet. Board
Cue Sheet window will open.
Step 2. If timing is desired, click in “T” column. A dot will
appear in column indicating that real timing will be used
when playing back board cue. (Timing can be turned
off at a later time by clicking in the “T” column again.)
Board Cue
Number
Steps which are part
of the selected Board Cue
Snapshot link
Cue link
Auto Follow type (wait, trail, or none)
Auto Follow time
Number of
loop cycles
Timing information
(This can be edited)
Delete
Punch In
Replace
Insert
Toggles on/off timing feature
so that Board Cue plays back
with or without timing