User`s manual

SNAPSHOTS, MACROS, AND BOARD CUES : MACROS
11
02.9651.0001 C 23-Sep-02 195
From Keypad
The macro record function can be initiated from the keypad. Timing can be specified
using command-line entry.
When [Enter] is pressed, the [Macro Rec] button will flash indicating that the
recording function is enabled. Pressing [Macro Rec] after this will disable the record
function in the event you need to abort the action.
Record a macro:
When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The [return]
button is also located on the keyboard.
Step 1. Press [Store] [Macro] [Enter].
Step 2. Enter sequence of button presses, display selections, or command-line
entries.
Step 3. Press [Store] [Macro] [n] [Enter] or [Store] [Macro] [n] [Label] [Enter]
[xxxxxx] [return] - where n is the number of the macro select where you wish
to store the recorded sequence.
Record a macro for timed playback:
Step 1. Press [Store] [Macro] [Enter].
Step 2. Enter sequence of button presses, display selections, or command-line
entries.
Step 3. Press [Store] [Macro] [n] [Time] [Enter] - where n is the number of the
macro select where you wish to store the recorded sequence.
Specify timing for a previously recorded macro:
• [Macro] [n] [Time] [Enter] - where n is the discrete macro number.
From Encoders Window
Macro (or board cue) recording can also be initiated from the Encoders window. Use
[Rec] button to begin a macro record operation as follows:
Click to [Rec] begin
Macro recording
Option
Hold
[Rec] to begin Board Cue recording
button and click