User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL

190 23-Sep-02 02.9651.0001 C

Store a snapshot using select display:

Step 1. Configure console as required.

Step 2. At Operation menu, select Snapshot Filter. Snapshot Filter window will

open.

Step 3. At window, select area to be snapshot and/or click on arrow to drop down

submasters window and select any required submasters to be snapshot.

Step 4. At a manual control select display, press [Bank/Function] / [Snaps].

Step 5. Press [Store] [Snapshot Select Button].

Label a snapshot:

When labeling, the [xxxxxx] is entered on the alpha-numeric keyboard. The [return]

button is also located on the keyboard.

• [Label] [Snap Shot] [n] [xxxxxx] [return], or

• [Label] [Snapshot Select Button] [xxxxxx] [return].

Link snapshot to a cue using shortcut method:

A shortcut for linking a snapshot to a cue is available. In this case, the current desk

settings are stored into the snapshot according to the filters currently enabled in the

Snapshot Filter window and automatically linked to the cue. The snapshot stored

using this method is given a snapshot number of 200 above. The number is chosen by

the console and cannot be accessed in the Snapshot Data window.

Step 1. At Snapshot Filter widow, ensure required areas of the console to be

snapshot are enabled.

Step 2. Configure console as required.

Step 3. Press [Cue] [n] [Link] [Snap Shot] [Snap Shot]. Snapshot will be stored as a

number above 200 and linked to the cue.

Note: Each snapshot created this way will be unique to that cue. Commonly used

snapshots should first be created and then linked to a cue using the Link command.

SNAPSHOTS

Bank 1 Page 1 Page 2 Page 3 Page 4 Page 5

2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

Indicates that Snapshots have been selected