User`s manual

SNAPSHOTS, MACROS, AND BOARD CUES : SNAPSHOTS
11
02.9651.0001 C 23-Sep-02 189
Storing Snapshots
Snapshots are stored in the Snapshots select banks and can be accessed on any of the
select displays just as Presets, Colors, Beams, Groups, Macros, and Effects or from the
keypad. For instructions on using the select displays, refer to the “Select Displays”
chapter on page 75.
Store a snapshot using window and keypad:
Step 1. Configure console as required.
Step 2. At Operation menu, select Snapshot Filter. Snapshot
Filter window will open.
Step 3. At window, select area to be snapshot and/or click on
arrow to drop down submasters window and select any required submasters
to be snapshot.
Step 4. Press [Store] [Snap Shot] [n] [Enter]. The portions of the console indicated
in the snapshot window will be stored in the target snapshot.
Note: For the Virtuoso DX console, the console sections are still relevant to the
console control. For example, Effects will still select the settings made at the Effect
select display.
Use cursor to select
panels to be captured
Drops down
submasters selections
Toggles row on or off
Selects all panels
and submasters
Deselects all panels
and submasters
Includes the Snapshot Filter window
in snapshot when checked
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Channel Select
Manual Control
Playback
Submasters (must be selected
Effects
to record drop-down selections)
DX