User`s manual

SPECIAL FEATURES : DATA COPY AND MOVE
10
02.9651.0001 C 23-Sep-02 181
Copy Data
The Copy Data feature allows you to copy all the data from one channel to another, or
to multiple channels. This is useful if additional luminaires are added to an existing
lighting rig. When copying to multiple channels, the data will only be copied to
luminaires of the same type as the source, leaving others unchanged.
CAUTION: There is no Undo for this action, so it is recommended that a backup of
the show file is made for archive purposes.
To copy data:
Step 1. Select control channel(s) of luminaire(s) to receive data.
Step 2. At Data menu, select Copy Data.
Note: Only one copy data action can be done at a time, from a
single source.
Step 3. A dialog window will open that allows selection of a
source channel number. Click OK.
Step 4. A warning dialog window will open, warning that previous existing data (if
any) in the destination channels will be deleted. If this is the desired action,
click Copy.
Enter source channel to copy data from.