User`s manual

TIMING/FILTER DISPLAYS : DYNAMIC STATE MODE
9
02.9651.0001 C 23-Sep-02 167
How To Store Dynamic Only Values
Note: For color palette settings where the filter selection is not used, all the color
parameters still store the dynamic data.
To store Dynamic Only values, do the following:
Step 1. At filter window, select parameter of function channel to be stored.
Step 2. Select .
Step 3. Store palette entry as normal.
Note: When working with the Color Palette, the settings window will change the
functionality. Set the "Use Func. Filter on Color Store" setting for best results.
FILTER
DYNAM
SNEAK
IFE
CBG
TIMING
Wheel
Magen
Amber
Blue
Down
Up
Tilt
Pan
Prism
Frost
Edge
Framing
Strobe
Zoom
Beam
Index
R Gobo
Gobo
INTEN FOCUS COLOR BEAM EDGE GOBO
Effect
E Index
Timing
Dynam
TO CUE
DynOnly
P = Parameter Value
(selects function to store)
D = Dynamic Value
DO = Dynamic Only
(stores only dynamic value)
(stores dynamic value)
DynOnly