User`s manual

VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
158 23-Sep-02 02.9651.0001 C
Set color delay time:
Step 1. Select channels as required.
Step 2. [Time] [n] [Delay] [m] [Enter] - sets all color timing to n seconds,
with an m second delay.
Set intensity delay time:
Intensity timing can have two values: one which controls the intensity transition if the
intensity is fading to a higher level (up time) and one which controls the transition if
the intensity is fading to a lower level (down time).
Step 1. Select channels as required.
Step 2. [Time] [1] [.] [0] [Delay] [.] [5] [Enter] - sets the up and down
times to 1 second, with a one-half second delay.
Set intensity up or down time:
Step 1. Select channels as required.
Step 2. Select or to select one individually, then press [Time] [1] [.]
[2] [Enter] - sets the up or down fade time to 1.2 seconds.
Set intensity up and down time while storing a cue:
For this shortcut, the first Time entered is always Up and the second is Down.
Step 1. Select channels as required.
Step 2. Ensure all parameters at Timing screen are deselected.
Step 3. Press [Store] [Cue] [x] [Time] [m] [Time] [n] [Enter] - stores Cue x with an
up time of m and a down time of n.
Set timing back to zero:
Step 1. Select channels as required.
Step 2. At screen/window, select a parameter.
Step 3. Press [Time] [0] [Enter].
Time and delay values stay in a luminaire until changed or set back to zero. Use the
Luminaire Status window with time ( ) selected to view current timing and delays.
To clear delay timing, select channel and appropriate parameters in the Timing
window and set delay to 0.
Color
Intensity
Up Down
Shortcut
Hint