User`s manual

BASIC EFFECTS : PLAYBACK
8
02.9651.0001 C 23-Sep-02 149
Playback
Basic Playback
After creating an effect, it can be played back using a submaster. (Unless a duration or
cycle count is specified, the effect will run until stopped.)
Play an effect:
Step 1. At keypad, press [Effect] [n] [Enter] or select an effect at Effect Select
display. It will be displayed by number and label in keypad display.
Step 2. At desired submaster, press [Select] to select
submaster for playback function.
Step 3. Press [Load] to place effect in submaster’s
pending file.
Step 4. Ensure Grand Master fader is set at full.
Step 5. Ensure submaster fader is 100%.
Step 6. Press [Go] to play effect. Display will
indicate set, sequence, and step numbers as
they run.
Step 7. Press [Run] to replay effect once it is active.
Play next effect:
The submaster always sequences, placing the next
available effect in the pending file.
• Press [Go] to play back pending effect.
Play previous effect:
The submaster can play back previously played
effects in decrementing order.
• Press [Back] to play previous effect.
set effect 5
Effect 5 ∗
FE
CG
e5
Colors
I
B
rate 100
e5
Colors
F
I
F
G
E
CB
C T
e4
Selects submaster
for playback
Loads effect
Plays active effect
Plays pending effect
Stops and steps
through effect
Plays last effect
Scales intensity
Active effect
Pending effect
Tilt
Select
Load
Run
Stop/
Step
Back
Go
T:1 Q:1
STP:1
S